 |
| محل منبع: | China |
| نام تجاری: | HY |
| گواهی: | ISO9001:2008 |
| مقدار حداقل تعداد سفارش: | 1 tons |
|---|---|
| قیمت: | Negotiation |
| جزئیات بسته بندی: | Anti rust oil to be applied on material and each rod to be packed in paper sleeve |
| زمان تحویل: | 30days |
| شرایط پرداخت: | T/T, L/C |
| قابلیت ارائه: | 30tons a day |
| Name: | Non-quenched and tempered steel rod | Material: | Non-quenched and tempered steel |
|---|---|---|---|
| Diameter: | 35mm - 140mm | Surface treatment: | Chrome plated |
| Tensile strength: | Not less than 750 Mpa | Yield strength: | Not less than 520 Mpa |
| برجسته: | chrome plated piston rod,chrome plated steel rod,chrome plated steel rod |
||
Non - Quenched And Tempered Steel Hydraulic Cylinder Rod Chrome Plated
Product Description
1. Non-quenched and tempered steel products is used in mechanical manufacturing for the directly
turning part of shaft and rod, ect.
2. Save manufacturing expenses and avoid waste in the tempering process.
3. Shortened processing periods, enhance productivity and reduce the occupied capital.
4. Low processing cost, needless quenched and tempered process and the second turning.
5. The steel directly turning saves the logistics cost.
6. Stable and uniform mechanical properties.
Detailed Description
1. MATERIAL: HY4700, HY4520
2. CHEMICAL COMPOSITION(%)
|
Material |
C% |
Mn% |
Si% |
S% |
P% |
V% |
Ni |
Cr% |
Mo |
Cu |
|
HY4700 |
0.38-0.45 |
1.20 ~1.60 |
0.30~0.50 |
≤0.035 |
≤0.020 |
0.05～0.15 |
≤0.25 |
0.10～0.20 |
≤0.15 |
0.25 |
|
HY4520 |
0.40 ~0.48 |
0.80 ~1.40 |
0.15 ~0.35 |
≤0.035 |
≤0.035 |
≤0.15 |
≤0.25 |
≤0.25 |
≤0.15 |
≤0.25 |
3. MECHANICAL PROPERTIES
|
Material |
MECHANICAL PROPERTIES |
Surface hardness(HBW) |
|||||
|
Rm(MPa) |
Rel(MPa) |
A% |
Z% |
KU2(J) |
|
||
|
HY4700 |
Φ35 - Φ100 |
900 - 1100 |
≥650 |
≥16 |
≥35 |
≥39 |
270-340 |
|
＞Φ100 - Φ140 |
850 - 950 |
≥600 |
≥16 |
≥35 |
≥39 |
270-340 |
|
|
HY4520 |
Φ40 - Φ100 |
750 - 900 |
≥520 |
≥19 |
≥40 |
≥39 |
230-290 |
|
＞Φ100～Φ140 |
750 - 900 |
≥520 |
≥17 |
≥35 |
≥39 |
230-290 |
|
|
|
|
|
|
|
|
|
|
4. SUPPLY CONDITION
Ground and chrome plated
5. CHROME THICKNESS
20 to 30 micron
6. SURFACE ROUGHNESS
Ra≤0.2 micron and Rt≤2 micron
7. TOLERANCES ON DIA
ISO f7 on the diameter
8.OVALITY
Half of the tolerance ISO f7
9. STRAIGHTNESS
≤0.2MM/M
10 .SURFACE HARDNESS
850-1150HV (vickers 100g)
11. COHESION
No craks,breaking or detaching after thermic shock(warming up at 300 celsius degrees
and cooling in water)
12 .POROSITY
Test according to ISO 1456/1458 and result yaluation according to ISO 4540 rating 8-10
13. WELDABILITY
Good
14. CORROSION RESISTANCE
Test in natural salt spray according to ASTM B 117-120hours
Results evaluation according to ISO 4540 RATING 7-10
15. PACKING
Anti rust oil to be applied on material and each rod to be packed in paper sleeve
16. CERTIFICATE
All certificate related with material heat treatment and plating is required
تماس با شخص: Miss. Patty
تلفن: 8613921505262
فکس: 86-510-83952939
